1050 aluminium coiled chubu
Zofotokozera
Mafotokozedwe Odziwika a Aluminium chubu
Aloyi Ayi. | Kupsya mtima | Tube Yowongoka | LWC | ||
OD(mm) | WT (mm) | OD(mm) | WT | ||
1060(L2) | R(H112) | 6-30 | 0.6-3 | 4-22 | 0.2-2 |
M(O) | 6-30 | 0.6-3 | 4-22 | 0.2-2 | |
H 14 | 6-30 | 0.6-3 | 4-22 | 0.2-2 | |
3A21 3003 3103 (LF21) | M(O) | 6-30 | 0.6-3 | 4-22 | 0.2-2 |
H12 | 6-30 | 0.6-3 | 4-22 | 0.2-2 | |
H14 | 6-30 | 0.6-3 | 4-22 | 0.2-2 | |
H18 | 6-30 | 0.6-3 | 4-22 | 0.2-2 | |
6063 (LD31) | M(O) | 6-30 | 0.6-3 | 4-22 | 0.5-2 |
T4 | 6-30 | 0.6-3 | 4-22 | 0.5-2 | |
T6 | 6-30 | 0.6-3 | 4-22 | 0.5-2 |
Kufotokozera kwa Inner Groove Aluminium Tube (Kukula kumatha kusinthidwa)
Kufotokozera (mm) | Unene wa khoma (mm) | Msinkhu (mm) | Helical angle (°) |
7 | 0.4-0.5 | 0.05-0.18 | 18 |
7.94 | 0.4-0.5 | 0.05-0.18 | 18 |
9.52 | 0.45-0.55 | 0.05-0.18 | 18 |
Katundu Wamakina a Inner Aluminium Grooved Tube
Zakuthupi | Tensile | Elongation Rate | Kukulitsa Mtengo |
3003 | 130MPA | 35 | 40 |
Kufotokozera kwa Package Coil
OD | 6.35 | 7.94 | 9.52 | 12.7 | 15.88 | 19.05 |
Makulidwe a Khoma | 0.7-1.0 | 0.8-1,2 | 0.8-1.2 | 1-1.5 | 1-1.5 | 1-1.5 |
quanlity gurantee
1) Kuwoneka kwapamtunda: Pamalo oyera oyera osakwanira, zokanda, zonyansa zamafuta kapena oxidation.
2) m'mphepete: mwaukhondo kudula m'mphepete palibe burrs.
3) Cholinga cha khalidwe: mlingo woyenerera woyendera malonda ndi 98%.Kukhutitsidwa kwamakasitomala ndi 95%.Zakuthupi: A1050, A1060, A1070, A3003, ndi zina zotero.
A1050 Aluminium Chemical Composition | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ena |
99.5-100 | 0 ~ 0.25 | 0 ~ 0.05 | 0 ~ 0.05 | 0 ~ 0.05 | 0 ~ 0.05 | 0-0.03 | 0 ~ 0.05 | 0 ~ 0.40 | 0-0.03 |
A1060 Aluminium Chemical Composition | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ena |
99.6-100 | 0 ~ 0.25 | 0 ~ 0.05 | 0-0.03 | 0 ~ 0.05 | 0-0.03 | 0-0.03 | / | 0-0.35 | |
A1070 Aluminium Chemical Composition | |||||||||
Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Ena |
99.7-100 | 0 ~ 0.2 | 0 ~ 0.04 | 0-0.03 | 0 ~ 0.04 | 0-0.03 | 0-0.03 | 0 ~ 0.05 | 0 ~ 0.25 |
A3003 Aluminium Chemical Mapangidwe | |||||||
Al | Si | Cu | Zn | Mn | Fe | Ena Osakwatira | |
ena | 0 ~ 0.6 | 0.05-0.20 | 0 ~ 0.1 | 1.0-1.5 | 0-0.70 | 0 ~ 0.05 |
Aloyi | Kupsya mtima | Kufotokozera | |||
Makulidwe (mm) | Diameter(mm) | Kulimba kwamakokedwe | Kuuma | ||
7075 7005 (chubu) | T5, T6, T9 | > 0.5 | 5.0-80 | > 310 MPA | > 140 |
6061 6063 (mbiri) | T5, T6 | > 1.6 | 10-180 | > 572 pa | HB90-110 |
Utali: <6Mita |
TEMPER | Kunenepa (mm) | KULIMBA KWAMAKOKEDWE | ELONGATION% | Standard |
T5 | 0.4-5 | 60-100 | ≥ 20 | GB/T3190-1996 |
T6 | 0.5-6 | 70-120 | ≥ 4 | |
T9 | 0.5-6 | 85-120 | ≥ 2 |
Aluminium mankhwala
Lembani uthenga wanu apa ndikutumiza kwa ife